User manual

AXIS M3006–V Network Camera
System Op tion s
System Options
Security
Users
User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can
set up other users by giving them user names and passwords. It is also po ssible to allow anonymous viewer login, which means
that anybody may access the Live View page.
The user list displays authorized users and user g roups (access levels):
Viewer - Access to the Live View page
Operator - Access to the Live View page and to all settings except System Options
Administrator - Unrestricted access to all s ettings; can add, modify and remove other users.
Under HTTP/RTSPPasswordSettings, select the type of password to allow. You may need to allow unencrypted passwords if there
are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need
to log in again and be configuredtousethisfunctionality.
Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.
Select the Enable anonymous PTZ control login to allow anonymo us users access to the PTZ controls.
Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup pr ovides quick access to settings that should be
made before using the Axis product.
ONVIF
ONVIF (Open Network Video Interface Forum) is a g lobal interfa ce standard tha t makes it eas ie r for e n d users, integrators, consultants,
and m a nufactur ers to take advantage of the p o ssibiliti es offered by network vide o technology. ONV IF ena bles intero per abli ty betwe e n
different vendor products, increased flexibility, red
uced cost and future-proof systems.
By creating a user you automa ticall
y enable ONVIF communication. Use the user name and password with all ONVIF comm unication
with the product. For more information see www.onvif.org
IP Address Filter
IP address filtering is ena bled on the System Options > Security > IP Address F ilter page. Once enabled, the listed IP address are
allowed or denied a cces
s to the Axis product. Select Allow or Deny from the list and click Apply to e n able IP ad dre ss filtering.
The administr
ator can add up to 256 IP address entries to the list (a single e ntry can conta in multiple IP addre sses) .
HTTPS
The Axis product supports encrypted browsing using H TTPS. This is configured on the System Options > Security > HTTPS page.
A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed
certificate to ins tall a self-signe d certificate. Although self-signed certificates are free and offer some protection, true security is only
implemented a fter the installation of a signed certificate issued by a Certifica te Authority.
To o btain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certifica te
is re turned, c lick Install signed certificate to import the certificate. The prop erties of any certificate request currently resident in
the product or installed can be viewed by clicking Properties.
To enable HTTPS in the Axis p roduct, the HTTPS Connection Policy must be set for each user group.
For more information, see the online help
.
34