Manualshelf

User`s manual

ManualsBrandsAxis ManualshomeM7014
31323334353637383940
AXIS M7014
System Options
1. Go to System Options > Storage a n d click SD Card.
2. Click Unmount.
3. The car d can now be removed.
The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.
If the c ard’s status s hows as fa ile d, click Check disk to see if the problem can be found and then try Repair. T his option is only
available for S D card s with e xt4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.
To a void filli ng the card, it is re com m e nde d to remove recordings continuously. Under Recording Settings, select Remove recordings
older than and select the number of days or weeks.
To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings.
Network Share
Network share allow s you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common
Internet File System) and use them for storage of recordings.
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.
4. Enter the name of the share in the Share field.
5. If required, select The share requires login and enter the user name and p
assword.
6. Click Connect.
To clear all recordings and data f rom the Axis product’s f
older on the designated share, click Cle ar under Storage Tools.
To avoid filling the share, it is recommended to re
move recordings continuously. Under Recording Settings,selectR emove recordings
older than and select the number of days or weeks.
To stop w riting to the share and protect recordings from being removed, select Lock under Recording Settings.
Maintenance
The Axis product provides several maintenance functions. These are available under System Options > Maintenance.
Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current
settings.
Click Restore to reset most settings to the facto ry d efault values. The fo llowing settings are not affected:
• the boot pro tocol (DHCP or static)
• the static IP address
• the default router
• the subnet m a sk
•thesystemtime
• the IEEE 802.1X settings
37