User`s manual

Section 7: Setup for Macintosh
Axis NPS 550 User’s Manual 53
Section 7
Setup for Macintosh
The basic setup for Macintosh is done by opening the Chooser window
and clicking a printer.
Before configuring your Macintosh system, you may want to configure
the NPS 550 (e.g. logical printer definitions). See Appendix A for details.
If you intend to operate your NPS 550 in a multi-protocol environment,
you should also proceed according to the other “Setup for...” sections as
appropriate.
Before you begin:
• Make sure that the NPS 550 is powered on and attached to the
network.
• Any network configuration should always involve the network
manager.