User`s manual

Section 3: Setup for NetWare
Axis NPS 630/632 User’s Manual 19
NPS 630/632
Configuration
The configuration involves specifying which NetWare file servers and
print queues the NPS 630/632 shall attach to. This is done using
AXCFG, the Axis NPS configuration software on the disk supplied with
the NPS 630/632. Follow the instructions in the read.me file on the disk
to install the software, then proceed as follows:
1. Start AXCFG, and select NetWare.
2. Select No at the ‘Look for old print servers’ prompt unless you are
configuring an NPS 630/632 with software revision prior to 4.20.
3. Choose Select All Networks, then select your NPS 630/632.
4. Type root and pass at the login prompt.
5. Select NETWARE MENU.
6. Select LOGIN1.
7. Type the name of the NetWare file server, the print queue, and the
logical printer number. Use the file server and print queue name from
the NetWare configuration above, and one of the logical printer num-
bers 1–8.
8. To specify more print queues, select LOGIN2 through LOGIN16 in
consecutive order. Repeat step 7 for each print queue.
9. Select Save, then select Cancel until AXCFG closes down.