User`s manual

Section 4: Setup for Windows
Axis NPS 630/632 User’s Manual 29
Section 4
Setup for Windows
This section describes how to set up your NPS 630/632 for the Microsoft
Windows environment. The following Windows platforms are
supported:
•Windows 3.1 (requires add-on network support)
• Windows for Workgroups
•Windows 95
•Windows NT
The setup is done using Axis Print Utility for Windows. Install the utility if
you haven’t already done so (see the instructions on the NPS 630/632
Setup disk label).
Axis Print Utility
for Windows
Axis Print Utility is a dual purpose application for network printing in the
Microsoft Windows environment. It’s two purposes are:
1. Install and maintain NPS 630/632 printer ports as Windows printer
ports.
Axis Print Utility automatically detects all NPS 630/632s on your net-
work. Any number of printers may be installed at any workstation.
2. Capture and monitor print jobs directed to NPS 630/632 ports.
Print jobs are directed through a spool directory, either at your local
hard disk (peer-to-peer mode) or at the file server (Client-Server
mode). NPS 630/632 printer ports can be monitored, and you get a
pop-up notification message when your print job is finished.
For more information about Axis Print Utility, see the on-line help.