User`s manual

Section 5: Setup for OS/2
40 Axis NPS 630/632 User’s Manual
Install the NPS 630/632
Once the Axis Print Utility is installed and running, you can install the
NPS 630/632 by clicking the Install entry on the action bar. The Install
command initiates a search for Axis print servers on the network. Your
new NPS 630/632 will appear in the list (together with any other Axis
print servers) as a printer port:
The digits following AX are the six last digits of the NPS 630/632 serial
number (C80061 in this example). LP1 is the NPS 630/632 printer port
(LPT1).
The Axis print server ports appearing in the list can now be assigned as
print queue destinations as described below.
Note: If the serial number of your NPS 630/632 is 000231C80061
, then the
default port name is AXC80061
.LP1. The serial number is found on the
label at the back of the NPS 630/632. You may change the default names
by editing parameters LPRINT_1, LPRINT_2, etc. in the config file as
described in Appendix A. If you want to change the default port names,
you must do that before installing the NPS 630/632 using Axis Print
Utility.
AXC80061.LP1