User`s manual

Appendix B: Internal printouts
Axis NPS 630/632 User’s Manual 75
Appendix B
Internal printouts
There are three different internal printouts that can be printed using the
TEST button on the NPS 630/632 front panel:
The Test Page The test page shows the software revision and the basic configuration of
the NPS 630/632.
To print the test page, press the TEST button until the STATUS indica-
tor starts to flash, then release the button.
The Parameter
List
The parameter list (or the config file) shows the complete NPS 630/632
configuration. See Appendix A for a sample parameter list.
To print the parameter list, press the TEST button until the STATUS
indicator starts to flash, release the button, and press it once.
The read.me File The read.me file contains detailed instructions about how to integrate the
NPS 630/632 for different TCP/IP environments and print methods. It
also contains last-minute information not covered by the printed docu-
mentation, so you should always read this file before starting the integra-
tion.
To print the read.me file, press the TEST button until the STATUS indi-
cator starts to flash, release the button, and press it twice.