User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 100

#016 Color String to Send at Power Up

The setting refers to parameter #130 to parameter #136 and determines which of them

that shall be sent to the printer at power up.

parameters:

#130 Color 1 to #136 Color 7

#017 UDS-String to Send at Power Up

The setting refers to parameter #120 to parameter #129 and determines which of them

that shall be sent to the printer at power up.

parameters:

#120 UDS 1 to #129 UDS 10

#018 Text Width Mode

Used for adjusting text when the number of characters on a line exceeds the Maximum

Print Position set by the Set Horizontal Format command or parameter #011, or when

the number of characters on a line exceeds the Physical Maximum Print Position

defined in parameter #019.

parameters:

#011 Maximum Print Position

#019 Physical Maximum Print Position at 10 CPI

Defines the physical right limit beyond which no printing is allowed.

parameter:

#018 Text Width Mode

Value Description

0 - 6 Refers to one of the parameters #130 to #136

*7 No Color String is sent at power up

Value Description

0 - 9 Refers to one of the parameters #120 to #129

*10 No UDS-String is sent at power up

Value Description

*0 A line break is performed if the current print position exceeds the

Maximum Print Position

1 A line break is performed if the current print position exceeds the

Physical Maximum Print Position

2 The line is cut off if the current print position exceeds the Physical

Maximum Print Position

3 The cpi setting is changed if necessary and the line is cut off if the

current print position still exceeds the Physical Maximum Print Position

Value Description

0 - 255 Valid Physical Maximum Print Position at 10 CPI

*132 Factory default