User`s manual

THE PARAMETER LIST (4214)
Axis AX-3 Cobra+ Technical Reference 101
#020 Monocase
If set to Yes, all text is printed with capital letters.
#021 Simulated Line Feed
If set to Yes, a Carriage Return is sent to the printer before the Line Feed sequence.
Then the current print position is restored.
Related
parameters:
#060 Carriage Return control character
#061 Line Feed control character
#024 Bottom Margin
The form length is reduced with the number of lines defined in this parameter. The
Form Feed, produced when the current print line exceeds the form length, is so then
issued earlier if this parameter is set to a value greater than 0.
Related
parameter:
#001 Form Length
#026 IBM Printer
Designates which IBM printer the protocol converter should emulate. The parameter
setting only determines the printer ID response from the protocol converter to the host
and doesn’t affect how the SCS commands are handled.
#028 Time Before Off-Line
See “Parameters (3812/5219 Emulation Only)” on page 79.
Value Description
*No Normal printing
Yes All text is printed with capital letters
Value Description
*No Only the Line Feed sequence is sent to the printer when the Line Feed
command comes from the host
Yes Carriage Return is issued before the Line Feed sequence and the
current print position is restored afterwards
Value Description
0-255 Number of lines to reduce form length with
*0 Factory default
Value Description
*0 IBM 4214 model 2
1 IBM 5256 model 1, 2 and 3
2 IBM 5224 model 1 and 2
3 IBM 5225 model 1, 2, 3 and 4
5 IBM 4230 model 101 (Applies to the AXIS 330 Cobra only)