User`s manual

THE PARAMETER LIST (4214)
Axis AX-3 Cobra+ Technical Reference 102
#029 Lock Form Length
If set to Yes, the Form Length defined in parameter #001 cannot be overridden by the
Set Vertical Format command.
Related
parameter:
#001 Form Length
#031 Baudrate
Does not apply to the Axis 330 Cobra. See “#031 Baud Rate” on page 80.
#032 Word Size
Does not apply to the Axis 330 Cobra. See “#032 Word Size” on page 80.
#033 Parity
Does not apply to the Axis 330 Cobra. See “#033 Parity” on page 80.
#034 Stop Bits
Does not apply to the Axis 330 Cobra. See “#034 Stop Bits” on page 80.
#035 XON/XOFF
Does not apply to the Axis 330 Cobra. See “#035 XON/XOFF” on page 81.
#036 XON Character
Does not apply to the Axis 330 Cobra. See “#036 XON Character” on page 81.
#037 XOFF Character
Does not apply to the Axis 330 Cobra. See “#037 XOFF Character” on page 81.
#038 Inverted Busy
Does not apply to the Axis 330 Cobra. See “#038 Inverted Busy” on page 81.
#039 PC-Host Time-out
Does not apply to the Axis 330 Cobra. See “#039 PC-Host Time-out” on page 81.
#040 Escape Character
See “#040 Escape Character” on page 82.
#041 Transparency Lead-In Sequence
See “#041 Transparency Lead-In Sequence” on page 82.
#042 Configuration Lead-In Sequence
See “#042 Configuration Lead-In Sequence” on page 83.
Value Description
*no The Set Vertical Format command may set Form Length
yes Form Length setting from the host is ignored