User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 104

#053 Bar Code Driver

Selects the graphics driver used for bar code printing.

Notes: 1. The default value depends on the selected Printer Driver.

2. If the Bar Code Driver is set to 0 (Off), an attempt to print bar code data results in

an error message (ERROR NO: BE - BAR CODE ERROR).

parameter:

#054 Bar Code Attributes

Controls the appearance of printed bar code data.

Notes: 1. The ‘Thin’ attribute reduces the bar width by 1/120 of an inch without affecting the

overall width. This attribute is effective only when the horizontal expansion factor

is set to 2 or greater, see function #211, section 10.

2. The ‘Bold’ attribute results in a more dense printout by printing the bar code data

twice.

3. For the HP-PCL driver the ‘Thin’ attribute reduces the bar width by 1/240" and the

‘Bold’ attribute increases the bar width by 1/360". The ‘Thin and Bold’ attribute

has no effect.

parameter:

#053 Bar Code Driver

Value Description

0 Off (bar code printing disabled)

1 IBM Proprinter/Epson FX

2 Epson LQ/Fujitsu DPL24C

8 HP-PCL

Value Description

*0 Normal

1 Thin

2 Bold

3 Thin and Bold