User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 105

#055 LAC with Bit Image-Graphics

Enables graphics printing with the Load Alternate Character command.

Notes: 1. The default value depends on the selected Printer Driver.

2. A setting of 2 or 3 keeps the correct proportions of the printed image but distorts

the cpi. These settings can be helpful if there is a readability problem with a bar

code.

parameters:

#056 Double Density Bit-Image Graphics

#057 Quad Density Bit-Image Graphics

#056 Double Density Bit-Image Graphics

Escape sequence for starting graphics printing in 120 dots per inch (dpi).

Note: 1. The default value depends on the selected Printer Driver.

parameter:

#055 LAC with Bit-Image Graphics

#057 Quad Density Bit-Image Graphics

Escape sequence for starting graphics printing in 240 dots per inch (dpi).

Note: 1. The default value depends on the selected Printer Driver.

parameter:

#055 LAC with Bit-Image Graphics

Value Description

0 Disable the LAC command

1 Adjust graphics data for correct character density (10 cpi or 15 cpi)

2 Print graphics data 1:1 in 120 dpi (12 cpi instead of 15 cpi)

3 Print graphics data 1:1 in 240 dpi (24 cpi instead of 15 cpi)

Value Description

<any seq> Sequence for 120 dpi bit-image graphics

<empty> The LAC command may not be enabled

Value Description

<any seq> Sequence for 240 dpi bit-image graphics

<empty> The LAC command may not be enabled