User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 107

#063 Header String

See “Parameters (3812/5219 Emulation Only)” on page 79.

#064 Host-PC Parallel String

Does not apply to the Axis 330 Cobra. See “Parameters (3812/5219 Emulation Only)” on

page 79.

#065 PC-Host TOF String

Does not apply to the Axis 330 Cobra. See “Parameters (3812/5219 Emulation Only)” on

page 79.

#066 Set Top of Form

Escape sequence for setting Top of Form in the printer.

Note: 1. The default value depends on the selected Printer Driver.

#070 Form Length Header

When the Set Vertical Format command is received from the host, the protocol

converter immediately starts to translate the vertical format setting to an equivalent

form length setting in the printer. The first step in that translation is to send the contents

of this parameter to the printer.

Note: 1. The default value depends on the selected Printer Driver.

parameters:

#071 Form Length Format

#072 Form Length Tail

Value Description

<any seq> Escape sequence for Top of Form

<empty> No Top of Form is set in the printer

Value Description

<any seq> First part of the escape sequence for form length setting

<empty> No start sequence for form length setting is sent to the printer