User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 111

Note: 1. The default value depends on the selected Printer Driver.

parameters:

#080 Line Density Header

#081 Line Density Format

#083 6 LPI

When byte 2 and/or byte 3 of the Line Density Format parameter is set to 0, the

sequence for selecting 6 lpi in the printer is used to simulate host settings of 3, 6, 12, 18

and 32 lpi.

Note: 1. The default value depends on the selected Printer Driver.

parameter:

#081 Line Density Format

#084 8 LPI

When byte 2 and/or byte 3 of the Line Density Format parameter is set to 0, the

sequence for selecting 8 lpi in the printer is used to simulate host settings of 4, 8, 16

and 24 lpi.

Note: 1. The default value depends on the selected Printer Driver.

parameter:

#081 Line Density Format

Value Description

<any seq> Sequence for selection of 6 lpi in the printer

<empty> No selection of 6 lpi is done in the printer

Value Description

<any seq> Sequence for selection of 8 lpi in the printer

<empty> No selection of 8 lpi is done in the printer