User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 113

#095 Continuous Form

Selects continuous form (tractor feed) in the printer and can only be triggered at power

up (if parameter #004 is set to 0).

Note: 1. The default sequence depends on the selected Printer Driver.

parameter:

#004 Feeder Type

#096 Sheet Feeder 1

#097 Sheet Feeder 2

#098 Sheet Feeder 3 (Envelope)

#099 Single Sheet

These parameters are used for selection of paper source in the printer.

Note: 1. The default sequences depend on the selected Printer Driver.

#110 Character Substitute 1

#111 Character Substitute 2

#112 Character Substitute 3

#113 Character Substitute 4

#114 Character Substitute 5

#115 Character Substitute 6

#116 Character Substitute 7

#117 Character Substitute 8

#118 Character Substitute 9

#119 Character Substitute 10

Each of these parameters can contain a string that may replace an ASCII character.

Value Description

<any seq> ASCII data sequence for selection of Continuous Form

<empty> No selection sequence is sent

Value Description

<any seq> ASCII data sequence for selection of paper source

<empty> No selection sequence will be sent (sheet feeder selection disabled)

Value Description

<any seq> ASCII data sequence replacing an ASCII character

<empty> Factory default