User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 114

Note: 1. To use a substitute sequence, a character in the Editable Set must have been

programmed to a value in the range $01 - $0A. At translation from EBCDIC to

ASCII, that value will refer to one of the character substitute sequences that will

replace the original ASCII character.

parameter:

#015 ASCII Character Set

#120 User Definable String 0

#121 User Definable String 1

#122 User Definable String 2

#123 User Definable String 3

#124 User Definable String 4

#125 User Definable String 5

#126 User Definable String 6

#127 User Definable String 7

#128 User Definable String 8

#129 User Definable String 9

These strings are reserved for customer use and may be programmed to contain data

free of choice. One of these strings, chosen by parameter #017, is automatically sent at

each power up.

Note: 1. The contents of the User Definable Strings can be sent to the printer using a special

syntax (see “User Definable Strings” on page 42).

parameter:

#017 UDS-String to Send at Power Up

Value Description

<any seq> ASCII data sequence

<empty> Factory default