User`s manual

INTERNAL FUNCTIONS (3812/5219)
AXIS AX-3 Cobra+Technical Reference 117
#205 Save Current Configuration
Function #205 saves all parameters in the parameter list and the Editable Set in
permanent memory so that changes made with parameter programming and function
#203 remains after power off.
#206 Initialize Printer
Function #206 performs a Warm Start, i.e. the protocol converter and the printer are
initialized to the power on status.
#207 Load Printer Driver
Function #207 loads a new Printer Driver, overriding the current configuration. Section
8 lists the available Printer Drivers. An invalid Printer Driver number results in loading
of the default driver.
#211 Define Bar Code
Applies to the Axis 330 Cobra only (optional on the AX-3 Cobra+).
Function #211 specifies the Bar Code type and size for subsequent Bar Code printouts.
• <BT> is the Bar Code Type.
• <MW> is the Module Width in multiples of
1/120".
• <BH> is the Bar Code Height in multiples of 1/6".
• <RT> Human Readable Text.
• <HP> is the Horizontal Start Position in multiples of 1/12".
Valid selections for Bar Code Type (BT):
*Applies to the AX-3 Cobra+ and AXIS 330 Cobra only.
Valid selections for Module Width (MW) in multiples of 1/120":
Syntax: =205
Syntax: =206
Syntax: =207
Syntax: =211,<BT><MW><BH><RT><HP>
Value Description
1 Code 39
3 UPC-A
8 EAN 8
9 EAN 13
12 2 of 5 Interleaved
13 Codabar Matrix
*17 Code 128
Value Description
1 - 32 Minimum Module Width 1/120",
maximum Module Width 32/120"