User`s manual

INTERNAL FUNCTIONS (3812/5219)
AXIS AX-3 Cobra+Technical Reference 118
Valid selections for Bar Code Height (BH) in multiples of 1/6":
Valid selections for Human Readable Text (RT):
Valid selections for Horizontal Start Position (HP) in multiples of 1/12":
#212 Print Bar Code Data
Applies to the Axis 330 Cobra only.
Function #212 prints bar code data as specified by function #211.
#220 Reset
Hard reset of the protocol converter. Equivalent to power on/off of the protocol
converter. Note that host communication will be temporarily lost.
#222 Print EBCDIC International Set 5 Table
Prints the EBCDIC International Set 5 Table depending on the selected printer driver.
#228 Print Parameter List
Prints the complete configuration.
#231 Print Software Header
Prints software revision information.
#232 Print Name of Current Printer Driver
Prints the name of the current printer driver.
Value Description
1 - 32 Minimum Bar Code Height 1/6",
maximum Bar Code Height 32/6"
Value Description
0 No text
1 Text immediately below bar code
2 Text below bar code with a blank line between
Value Description
1 - 255 Leftmost Start Position 1/12", rightmost Start Position 255/12"
Syntax: =212,"<ASCII literals to be printed as bar code data>"
Syntax: =220
Syntax: =222
Syntax: =228
Syntax: =231
Syntax: =232