User`s manual

IBM 5250 CONTROL CODES
AXIS AX-3 Cobra+ Technical Reference 14
SECTION 2
IBM 5250 CONTROL CODES
This Section describes the IBM SCS control codes supported by the AX-3 Cobra+. The
control codes are described as emulated by the IBM 3812/5219 printer and the IBM
4214 model 2 printer.
The performance of the control codes is not fully described here and this presentation
must only be used as an overview. For details, refer to the appropriate manual in
Appendix G, Related Documentation.
Control codes for which no operation is performed, are not described in this Section.
The control codes have been divided into three groups:
• Control codes common to 3812/5219 emulation and 4214 emulation
• Additional control codes for 3812/5219 emulation
• Additional control codes for 4214 emulation