User`s manual

IBM 5250 CONTROL CODES
AXIS AX-3 Cobra+ Technical Reference 20
Page Presentation Media (PPM)
Specifies presentation media device settings.
Count (nn): Number of bytes following this command plus one.
Reserved (xxxx): These two bytes are ignored.
Forms Control (fc): Valid values are:
Source Drawer (sd): Valid values are:
Destination Drawer Offset (do): Valid range is $00 – $FF. If do is zero, the output
will not be jogged. Any non-zero value will jog the output, provided that one or more
pages have been printed since the last non-zero do.
Destination Drawer (dd): A change of this value causes the IBM 3812/5219 to jog the
output tray. The value is ignored by an IBM 4214 printer.
Quality (qq): Valid values are:
Duplex (dx) (3812 emulation): Valid values are:
Bell (BEL)
Sounds the audible alarm.
$2B $D2 nn $48 xxxx fc sd do dd qq dx
Value Description
$00 No change in the present forms selected
$01 Selection of paper as the forms to use
$02 Selection of envelopes as the forms to use
Value Description
$00 No change of source drawer selection
$01 Selection of source drawer 1
$02 Selection of source drawer 2
$03 Selection of source drawer 3
$04 Selection of source drawer 4
Value Description (3812) Value Description (4214)
$00 No change $00 No change
$01 Computer output reduction $01 Data processing quality
$02 No computer output reduction $02 Near letter quality
$03 No computer output reduction $03 Fast draft
$FF Use power on default quality
Value Description
$00 No change regarding simplex/duplex printing
$01 Simplex printing
$02 Duplex printing
$03 Tumbled duplex printing
$2F