User`s manual

EXTENDED EMULATION MODE
AXIS AX-3 Cobra+ Technical Reference 33
SECTION 4
EXTENDED EMULATION MODE
During normal mode of operation the protocol converter, together with your printer,
emulates the IBM printer selected in your configuration. In addition, the Extended
Emulation Mode gives you access to functions not available in standard IBM printer.
These functions are:
• Hex Transparency
• Configuration from the System
• Internal Function Execution
• User Definable Strings
The following parameters control Extended Emulation Mode:
#040 Escape Character (ESC)
#041 Transparency Lead-In Sequence (TLI)
#042 Configuration Lead-In Sequence (CLI)
#043 Transparency/Configuration Trailer Sequence (TCT)
#044 Extended Emulation Control Sequence (EECS)
All parameters and internal functions are further described in Section 9 and 10.
Note: Extended emulation will not work if you have set Host Print Transform in your host
configuration. (See page 34.)