User`s manual

AXIS AX-3 Cobra+ Technical Reference 4

EMISSION NOTICES

USA

This equipment generates, uses, and can radiate radio frequency energy and if not

installed and used in accordance with the instruction manual, may cause interference to

radio communications. It has been tested and found to comply with the limits for a

Class A computing device pursuant to Subpart B of Part 15 of FCC rules, which are

designed to provide reasonable protection against such interference when operated in a

commercial environment. Operation of this equipment in a residential area is likely to

cause interference in which case the user at his own expense will be required to take

whatever measures may be required to correct the interference. Shielded cables should

be used with this unit to ensure compliance with the Class A limits.

Europe

This digital equipment fulfils the requirements for radiated emission according to limit

B of EN55022/1987, and the requirements for immunity according to EN50082-1/1992

residential, commercial, and light industry. (Compliance is not valid for unshielded

network and printer cables.)

TRADEMARK ACKNOWLEDGEMENTS

IBM, Epson, Fujitsu, OKI, Diablo, Philips, Mannesmann, Brother, Hewlett-Packard,

LaserJet, Kyocera Prescribe, FormsXpress, Canon and Xerox are registered trademarks

of the respective holders.

AX-3 Cobra+ Technical Reference Revision: 6.0

Part No: 12938 Dated: February, 1997