User`s manual

FEATURES AND FONTS
AXIS AX-3 Cobra+ Technical Reference 48
Changing Super/Subscript Level (3812/5219 Emulation Only)
With the protocol converter, it is possible to control the amount of vertical movement
for the Superscript and Subscript command issued by the host. Using the default setting
will cause text to be moved the distance of half a line feed in the current LPI (Lines per
Inch).
Besides the default setting and shutting off the function, the distance can be set to 1/4,
1/6 and 1/8 of a line feed.
Notes: 1. Parameter #051 is used for Super/Subscript level and 2 selects 1/4 of a line feed.
2. Function #205 saves the change permanently and #206 performs a software reset.
3. Extended Emulation Mode has to be active. See page 33.
Result: Each time the Superscript or Subscript command is issued by the host, the protocol
converter will move the current vertical position 1/4 of a line feed upwards
(superscript) or downwards (subscript).
Example: %P
=51,2 Note 1
=205=206 Note 2
%