User`s manual

FEATURES AND FONTS
AXIS AX-3 Cobra+ Technical Reference 54
Left and Top Margin - COR (3812/5219 Emulation Only)
There is a possibility in the protocol converter to adjust top and left margins when
COR is used.
The function is useful for printers that have non-standard default top and left margins
in landscape orientation. By setting parameters #58 (Left Margin - COR) and #59 (Top
Margin - COR) the top and left margins can be set to get the desired margins.
Internal printouts such as the Parameter List and EBCDIC-To-ASCII Translation Table
are not affected by the Left and Top Margin parameters.
Notes: 1. Parameter #058 defines the left margin in units of 1/72 inch. (Default value: 36/72
= 1/2 inch.)
2. Parameter #059 defines the left margin units of 1/72 inch. (Default value: 36/72 =
1/2 inch.)
3. Extended Emulation Mode has to be active. See page 33.
Result: The left and top margins are set to 1 inch.
Example: %P
=58,72 Note 1
=59,72 Note 2
%