User`s manual

FEATURES AND FONTS
AXIS AX-3 Cobra+ Technical Reference 65
Programming
String
Substitutions
from the System
The same programming example as above can also be obtained by inserting the
following lines into your document. String Substitutions are programmed in Extended
Emulation Mode.
Bar Codes
This function gives you easy access to a range of standard bar code types resident in
the protocol converter. You can design every bar code printout to meet your specific
requirements, such as width and height.
This function is included as standard in the AXIS 330 and the AX-3 Cobra+ (except in
3812/5219 mode where it is optional). Please contact your dealer/distributor for more
details.
Bar codes are defined and printed by two internal functions:
#211 Define Bar Code
#212 Print Bar Code Data
There are also two parameters controlling the bar code printouts:
#053 Bar Code Driver
#054 Bar Code Attributes
See section 9 and 10 for a description of parameters and functions.
Supported Bar Code Types:
* Applies to the AX-3 Cobra+ and Axis 330 Cobra only.
Notes: 1. The symbols supported by Code 39 are plus (+), minus (-), period (.), slash (/),
percent (%), dollar ($), apostrophe (') and space(‘ ’).
2. The symbols supported by Codabar Matrix are plus (+), minus (-), period (.), slash
(/), dollar ($) and colon (:). A- D can only be used as start and stop characters.
%P (Configuration lead-in sequence)
=150,$1B,$2D,$31 (Start underline - Proprinter)
=151,$1B,$26,$64,$44 (Start underline - HP LaserJet)
=152,$1B,$2D,$30 (Stop underline - Proprinter)
=153,$1B,$26,$64,$40 (Stop underline -HP LaserJet)
=205 (Initialize settings)
=206 (Save settings permanently)
% (Configuration trailer sequence)
Bar Code Type Length Valid Characters Checksum Digit
1: Code 39 1 - 32 0 - 9, A - Z, Symb. No
3: UPC-A 11 0 - 9 Yes
8: EAN 8 7 0 - 9 Yes
9: EAN 13 12 0 - 9 Yes
12: 2 of 5 Interl. 1 - 32 0 - 9 No
13: Codabar Matr. 2 - 34 0 - 9, A - D, Symb. No
*17: Code 128 1 - 32 0 - 9, A -Z, Symb. No