User`s manual

THE PARAMETER LIST (3812/5219)
AXIS AX-3 Cobra+ Technical Reference 79
SECTION 9
THE PARAMETER LIST
This Section describes the parameters available in the protocol converter. All
parameters can be edited using either the Configuration from the System (see
“Configuration from the System” on page 36) or from the Edit Parameters entry in the
main menu of the Configuration from a Terminal (see the User’s Manual).
“Parameters (3812/5219 Emulation Only)” below, covers the parameters available in
3812/5219 emulation mode and “Parameters (4214 Emulation Only)” on page 96, the
parameters available in 4214 emulation mode.
Parameters (3812/5219 Emulation Only)
#010 System Language
Makes the EBCDIC Language Coded-To-EBCDIC International Set 5 Character
Translation Table match the system language configuration of the IBM system.
#028 Time Before Off-Line
The value in this parameter is counted in 1/10 of a second and controls the off-line
(Unit Not Available) information to the host if the printer goes off-line during printing.
It determines the time from when the protocol converter detects the off-line or paper
out state of the printer, until it responds information about it to the host.
Value Code Page Description
1 037 US English/Canadian
2 273 German/Austrian
3 274 Belgian
4 275 Brazilian
5 276 Canadian French
6 277 Danish/Norwegian
7 278 Finnish/Swedish
8 297 French
*9 500 International Set 5
10 280 Italian
11 281 Japanese English
12 282 Portuguese
13 284 Spanish Speaking
14 285 UK English
15 871 Icelandic
Value Description
0 The protocol converter never responds Unit Not Available to the host
1-255 Delay in 1/10 of a sec. between printer off-line and Unit Not Available
*200 Factory default