User`s manual

THE PARAMETER LIST (3812/5219)
AXIS AX-3 Cobra+ Technical Reference 86
#052 Font Setting Mode
For determination of when a font selection, initiated from the host, shall cause the
protocol converter to select a font in the printer.
#053 Page Orientation Mode
The parameter determines how to handle page orientation.
#054 ASCII Character Set
For selection of the character set that will be used in the protocol converter and an
attached printer.
Notes: 1. The default value depends on the selected Printer Driver.
2. The corresponding character set is automatically selected in the printer when this
parameter is changed.
3. Character Editing is always performed in the Editable Set and changes in the
character translation table doesn’t take effect until this character set is selected.
4. Unchanged, the Editable Set is equal to the PC-850 character set.
Related
parameters:
#115 Character Set 1 - US ASCII #118 Character Set 4 - PC-850
#116 Character Set 2 - PC-8 #119 Editable Character Set
#117 Character Set 3 - Roman-8
Value Description
0 No font selection will be made (font selection disabled)
*1 A font will be selected if it differs from the previous one selected
2 Always select a font
Value Description
0 Automatic Orientation - Portrait if invalid page size set from host
1 Automatic Orientation - Landscape if invalid page size set from host
*2 Automatic Orientation - COR if invalid page size set from host
3 Always Portrait
4 Always Landscape
5 Always COR
6 Same as 2, but inhibit COR from host will be ignored
Value Description
1 US ASCII
2 PC-437 (PC-8, IBM PC Set 2, Code Page 437)
3 Roman-8
4 PC-850 (Code Page 850)
5 Editable Set