User`s manual

THE PARAMETER LIST (3812/5219)
AXIS AX-3 Cobra+ Technical Reference 92
#120 User Definable String 0
#121 User Definable String 1
#122 User Definable String 2
#123 User Definable String 3
#124 User Definable String 4
#125 User Definable String 5
#126 User Definable String 6
#127 User Definable String 7
#128 User Definable String 8
#129 User Definable String 9
These strings are reserved for customer use and may be programmed to contain
arbitrary data.
Note: 1. The contents of the User Definable Strings can be sent to the printer using a special
syntax, see“User Definable Strings” on page 42.
#130 Underline On
#131 Underline Off
Two parameters used for control of underlining initiated by the host.
Note: 1. The default sequences depend on the selected Printer Driver.
#132 Job Offset (Jogging)
Parameter used for jogging of the printer’s output tray between jobs.
Value Description
<any seq> ASCII data sequence
<empty> Factory default
Value Description
<any seq> ASCII data sequence for start/stop of underline
<empty> No underlining performed (underline function disabled)
Value Description
<any seq> ASCII data sequence for output tray jogging
<empty> No jogging performed (jogging function disabled)