User`s manual

THE PARAMETER LIST (3812/5219)
AXIS AX-3 Cobra+ Technical Reference 93
#133 Horizontal Motion Index
Sets in the printer the horizontal distance the print position will advance for each
printed character (i.e. the character width).
Notes: 1. The default sequence depends on the selected Printer Driver.
2. The HMI will be set after each font selection sequence sent to the printer.
3. The HMI value is determined by the third byte in the font definition string of the
currently selected font.
4. For a proportionally spaced font, the HMI sets the width of the space character.
Related
parameters:
#150 - #199 Font Definition Sequences
#134 Horizontal Position
#135 Vertical Position
The strings in these parameters are used for setting of absolute horizontal and vertical
print position with a resolution of 1/720".
Notes: 1. The default sequences depend on the selected Printer Driver.
2. These parameters must always have appropriate contents to make the
protocol converter print host printouts correctly.
#136 Offset for Bold
#137 Reset Offset for Bold
Simulated boldface printing is performed by printing text twice with a small
displacement the second time. These strings are used to do the displacement and to
reset to normal printing.
Value Description
<any seq> ASCII data sequence for setting of character width
<empty> No character width will be set (horizontal motion index disabled)
Value Description
<any seq> ASCII data sequence for setting of horizontal/vertical print position
<empty> No print position will be set
Value Description
<any seq> Performs a small relative positioning forwards/backwards
<empty> No boldface performed (simulated boldface printing disabled)