User`s manual

THE PARAMETER LIST (3812/5219)
AXIS AX-3 Cobra+ Technical Reference 95
#150-199 Font Definition and Selection Sequences
When a font selection command has been received from the host and the protocol
converter has sent the appropriate Default Font Selection Sequence to a printer, the
contents of these parameters will be used to complete the font selection.
Each sequence consists of two parts; one for definition of FGID, HMI and ASCII
Character Set, and one for the sequence that will be sent to the printer for font
selection.
The two first bytes define the FGID number of the font. The third byte determines the
character spacing (HMI) and the fourth byte connects one of the ASCII Character Sets
in parameter #115 - #119 to the font defined in the current sequence (a value of 0 in
this byte means that the ASCII Character Set defined in parameter #054 will be used).
The sequence following the fourth byte will unconditionally be sent to the printer as an
addition to the Default Font Selection Sequence.
After the additional sequence has been sent, the character spacing defined in the third
byte (HMI) will be set in the printer (see parameter #133).
Value Description
<any seq> A font is defined with possible selection sequence
<empty> No font is defined and no selection will be made