User`s manual

THE PARAMETER LIST (4214)
Axis AX-3 Cobra+ Technical Reference 96
Parameters (4214 Emulation Only)
#001 Form Length
The value in this parameter is set in the printer at power up and software reset, and
when the Set Horizontal Format command selects the front panel setting.
Note: 1. The Form Length setting is overridden by the Set Horizontal Format command.
Related
parameters:
#029 Lock Form Length #071 Form Length Format
#070 Form Length Header #072 Form Length Tail
#002 Character Density
Designates the character density to set in the printer at power up.
Note: 1. The Character Density parameter is overridden by the Set Character Density
command.
Related
parameters:
#006 Lock Characters per Inch #087 12 cpi selection sequence
#085 5 cpi selection sequence #088 15 cpi selection sequence
#086 10 cpi selection sequence #089 16.7 cpi selection sequence
#003 Line Density
The parameter setting determines the line density that will be set at power up. The
value is rounded to a multiple of 1/72 inch.
Note: 1. The Line Density parameter is overridden by the Set Line Density command.
Related
parameters:
#007 Lock Lines per Inch #082 Line Density Tail
#080 Line Density Header #083 6 Lines per Inch
#081 Line Density Format #084 8 Lines per Inch
Value Description
0-255 Form Length in number of lines
*48 Factory default
Value Description
5 5 characters per inch
*10 10 characters per inch
12 12 characters per inch
15 15 characters per inch
16 16.7 characters per inch
Value Description
0-255 Line density in Lines per Inch
*6 Factory Default