User`s manual

THE PARAMETER LIST (4214)

Axis AX-3 Cobra+ Technical Reference 97

#004 Feeder Type

Designates the paper feeder type to be selected at power up.

Note: 1. The Feeder Type parameter is overridden by the Page Presentation Media

command.

parameters:

#008 Lock Feeder Type #097 Sheet Feeder 2 selection seq.

#095 Continuous Form selection seq. #098 Sheet Feeder 3 selection seq.

#096 Sheet Feeder 1 selection seq. #099 Single Sheet selection seq.

#005 Print Quality

The Print Quality set in this parameter is set in the printer at power up.

Note: 1. The Print Quality parameter is overridden by the Page Presentation Media

command.

parameters:

#009 Lock Print Quality #077 Quality 3 selection seq.

#075 Quality 1 (Draft Quality) selection seq. #078 Quality 4 selection seq.

#076 Quality 2 (Near Letter Quality) selection seq.

#006 Lock CPI

If set to Yes, the cpi defined in parameter #002 cannot be overridden by the Set

Character Density command.

parameter:

#002 Character Density

Value Description

*0 Continuous Form (Tractor Feed)

1 Sheet Feeder 1

2 Sheet Feeder 2

3 Sheet Feeder 3

4 Single Sheet

Value Description

*1 Quality 1 (Draft Quality)

2 Quality 2 (Near Letter Quality)

3 Quality 3 (Fast Draft)

4 Quality 4

Value Description

*no Allow the Set Character Density command to set cpi

yes The Set Character Density command is disabled