USER’S MANUAL AXIS P33 Network Camera Series AXIS P3343 Network Camera AXIS P3343-V Network Camera AXIS P3343-VE Network Camera AXIS P3344 Network Camera AXIS P3344-V Network Camera AXIS P3344-VE Network Camera AXIS P3346 Network Camera AXIS P3346-V Network Camera AXIS P3346-VE Network Camera
AXIS P33 Series User’s Manual Notices This manual is intended for administrators and users of the AXIS P33 Series, and is applicable for firmware release 5.20 and later. It includes instructions for using and managing the camera on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications.
AXIS P33 Series - Table of contents Contents AXIS P33 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P33 Series AXIS P33 Series This manual is relevant to the following network cameras: AXIS P3343 Network Camera Series • • • AXIS P3343 Network Camera AXIS P3343-V Network Camera AXIS P3343-VE Network Camera AXIS P3344 Network Camera Series • • • AXIS P3344 Network Camera AXIS P3344-V Network Camera AXIS P3344-VE Network Camera AXIS P3346 Network Camera Series • • • AXIS P3346 Network Camera AXIS P3346-V Network Camera AXIS P3346-VE Network Camera The information in this manual applies to all the
AXIS P33 Series Key features • • • • • • • • Superior image quality These cameras offer superior image quality with progressive scan, providing crisp and clear images of both illuminated and dark areas. AXIS M3346 offers superb image quality in 3MP resolution and HDTV streaming in 1080p at 30 fps. Easy installation These network cameras are easy to install.
AXIS P33 Series Hardware overview mounting bracket unit casing SD memory card slot camera unit holes for cables routed through the wall Fan output connector serial no. holes for cables routed along the wall dome cover Camera unit audio out control button LED connectors network connector audio in LED indicators LED Color Indication Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity. Amber Steady for connection to 10 Mbit/s network.
AXIS P33 Series Unit connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended. Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out.
AXIS P33 Series - Accessing the Camera Accessing the Camera To install this AXIS product, refer to the supplied installation guide. The network camera can be used with most standard operating systems and browsers. The recommended browser is Microsoft Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Technical specifications starting on page 52.
AXIS P33 Series - Accessing the Camera Access from the internet Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.
AXIS P33 Series - The Live View page The Live View page How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show up unless configured to do so. General controls View size – Click to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile in the Live View page.
AXIS P33 Series - The Live View page Pan/Tilt/Zoom controls Click the Center mode button and click on a position in the image to center the camera view on that position. Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer. Pan and Tilt bars – Click a position directly on the bar to steer the camera view directly to the new position in one smooth movement or click on the arrows at the ends of the bars to steer the camera in steps.
AXIS P33 Series - Video Streams Video Streams The network camera provides several image and video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the network camera provides access to H.264, and Motion JPEG video streams, and to the list of available stream profiles. Other applications and clients can also access these video streams/images directly, without going via the Live View page. How to stream H.
AXIS P33 Series - Video Streams AXIS Media Control (AMC) AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows is the recommended method of accessing live video from the network camera. The AMC control panel can be used to configure various video and audio settings. Please see the AMC user manual included in the tool for more information. The AMC control panel is automatically installed on first use, after which it can be configured.
AXIS P33 Series - Video Streams Accessing audio streams The Live View page provides access to audio through AXIS Media Control; in addition audio can be accessed in the following ways: VAPIX® Audio can be accessed through the VAPIX® Application Programming Interface (API). For more information visit http://www.axis.com/techsup QuickTime and Windows Media Player Simplex audio can be accessed via QuickTime and Windows Media Player by using the same paths as for video streams (see above).
AXIS P33 Series - Video & Audio Video & Audio This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access to all settings; and Operators, who have access to the settings for Basic Setup, Video and Events. You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click access the online help that explains the configuration menus in the web interface.
AXIS P33 Series - Video & Audio Audio Enable Audio Check the Enable audio box option to enable the audio functionality. Note: Audio support must be also enabled under System Options > Security The settings defined under Audio Settings are displayed under Current Audio Settings. H.264 GOV Settings The GOV structure describes the composition of the video stream; setting the GOV-length to a higher value saves considerably on bandwidth but may have an adverse effect on image quality.
AXIS P33 Series - Video & Audio Stream Profiles There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new customized profiles can be created. Each profile has a descriptive name, describing its use and purpose. The profiles can be accessed from the Live View page. • • • • • • To add a new stream profile, click Add... in the Stream Profile List page. The Stream Profile Settings dialog appears.
AXIS P33 Series - Video & Audio Contrast - Adjust the contrast of the image by raising or lowering the value in this field. White balance This is used to compensate for the different colors present in different light sources, to make the colors in the image appear the same. The network camera can be set to automatically identify the light source and compensate for its color. Alternatively, for a description of the type of light source can be manually selected from the drop-down list.
AXIS P33 Series - Video & Audio Iris adjustment - Set the preferred F:value, with this slide bar. When the Enable automatic iris adjustment option is enabled, the precise iris will use this value as long as light conditions are favorable for the setting; otherwise it will adjust itself to the best iris setting. If the automatic iris adjustment is NOT enabled, the precise iris will lock on this setting regardless of light conditions. The number scale represents the degree to which the iris is open.
AXIS P33 Series - Video & Audio View area Aspect ratio - is a ratio of width to height in images, 4:3 is a common in television screens and computer monitors while HDTV uses 16:9. Select the aspect ratio for the view area. Video stream resolution - This drop-down list gives the available video resolutions for the view area, depending on the aspect ratio chosen. View area size - Shows the size of the view area.
AXIS P33 Series - Video & Audio Focus & Zoom Through this page you can focus and zoom the Network Camera from the web interface. It is recommended that you only use this feature during installation or re-installation of the camera. See the Installation Guide supplied with the product. An auto focus function is available under the Basic tab. At the bottom of the preview is a pixel counter, which is useful where the image needs to be a certain size; face recognition is a good example.
AXIS P33 Series - Video & Audio It is recommended to try the Fine-tune focus automatically button first and if you're not satisfied with the results, try the Full range focus scan. Click Full range focus scan to calculate the focus positions within the focus window. The focus position bar is transformed to a graph where peaks indicate the best focus positions. Click in the graph to set focus to that position. Note that the scan could take several minutes.
AXIS P33 Series - Video & Audio Audio Settings Audio Channels The Audio mode that you select determines the type of audio transmission. The available options are: Full duplex - Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time. Note: There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker. Half duplex - Non-simultaneous two-way audio.
AXIS P33 Series - Live View Config Live View Config 24
AXIS P33 Series - Live View Config Live View Layout Stream Profile From the Stream Profile drop-down list, select the stream profile to use for the Live View page. Standard stream profiles are on this page for more listed as well as the ones created under Video > Stream Profiles. See the online help files information Default Viewer From the drop-down lists, select the default method for viewing video images for your browser.
AXIS P33 Series - Live View Config When you enable the Show fan and Show heater buttons, they appear in the Live View page. Click on these buttons to activate the fan or heater for five minutes (only available in the AXIS P3343-VE, AXIS P3344-VE and AXIS P3346-VE network cameras). User Defined Links User defined links can be CGI links or web links. Once configured, the link(s) appear in the Live View page.
AXIS P33 Series - PTZ PTZ To enable digital PTZ, and PTZ controls in Live View go to Video & Audio > View Area and select the Enable PTZ check box option. Click Save. The PTZ menu now appears. Preset Positions A preset position is a pre-defined camera view that can quickly and easily be viewed, simply by selecting the preset's name. To create a preset position: 1. Using the Pan, Tilt and Zoom (PTZ) controls, move the camera view to the required position. 2.
AXIS P33 Series - Applications Applications Application Packages The Applications feature allows you to upload third party applications for use on this device. Listed under Applications > Packages are the applications that have already been installed. Click on the name to view the menu options - Settings, License and About. Settings - This is dependent on the application. License - Once uploaded some applications need a license to run, and a license code is required for the uploaded application.
AXIS P33 Series - Events Events Pre-defined parameters, known as an event or Event Type can trigger specific actions in the camera. A common event type is an alarm that causes the camera to upload images. Many event types use an Event Server, to receive uploaded images. An event that is triggered by a signal, such as a door switch, motion detection, or system event, is called a triggered event. See page 30. A scheduled event is one that runs at pre-programmed times.
AXIS P33 Series - Events Triggered Event A triggered event could be activated by: • • • • • • • • • • • • a manually activated action, such as from an action button in the web interface detected movement in a configured motion detection window on restart (reboot), after power loss camera tampering input ports IR cut filter audio full disk fan malfunction application trigger temperature pan tilt zoom How to set up a triggered event The following example describes how to set up the camera to upload images w
AXIS P33 Series - Events Continue image upload (unbuffered) - enables the upload of video images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if uploading via a slow connection.
AXIS P33 Series - Events Motion Detection Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. It is possible to configure a total of 10 Include and/or Exclude windows for motion detection.
AXIS P33 Series - Events Configuring Motion Detection 1. Click Motion Detection in the Events menu. 2. Click the New button against Windows Name. 3. Select the Configure Included Windows or the Configure Excluded Windows option to define an Include or Exclude window, and enter a descriptive name in the field below. 4. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired position) of the active window. 5.
AXIS P33 Series - Recordings Recordings The Network Camera can be set to record continuously or as result of a triggered or scheduled event. See Continuous Recording, on page 35 and Event Types, on page 29 for more information. The Recording List window contains a list of recordings made to the local storage. It shows each recording's start time, length, the event type used to start the recording, and if the recording is locked so that it can neither be deleted nor recorded over.
AXIS P33 Series - Recordings Continuous Recording The AXIS P33 Series network camera can be configured to continuously save video to local storage. Automatic Disk Cleanup should be enabled when using Continuous Recording to prevent the local storage from becoming full. See Storage - Disk Management, on page 44. Recording Settings Enabled - Must be checked to record continuously. Disk - Shows as SD Card for this product. Stream Profile - Select a stream profile to use for recordings.
AXIS P33 Series - System Options System Options Security Users User access control is enabled by default. An administrator can set up other users, by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page: The user list displays the authorized users and user groups (levels): Viewer Operator Administrator Provides the lowest level of access, which only allows access to the Live View page.
AXIS P33 Series - System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must authenticate themselves.
AXIS P33 Series - System Options • • Synchronize with NTP Server - the camera will obtain the time from an NTP server on a regular basis. Set manually - this option allows you to manually set the time and date. Note: If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > Basic TCP/IP Settings below. Date & Time Format Used in Images - Specify the formats for the date and time (12h or 24h) displayed in the video streams.
AXIS P33 Series - System Options Network Basic TCP/IP Settings Your Axis network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the configuration in the network router.
AXIS P33 Series - System Options Always - The camera will constantly attempt to connect to the AVHS service over the Internet; once registered the camera will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use the one-click installation. AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to your network camera (requires Internet access). Click Settings...
AXIS P33 Series - System Options Use NAT traversal when your network cameras are located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the camera. LAN (intranet) WAN (internet) Broadband (NAT) router ISP Notes: • For NAT traversal to work, this must be supported by the broadband router.
AXIS P33 Series - System Options QoS (Quality of Service) Quality of Service (QoS) guarantees a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency, and no packet losses. The main benefits of a QoS-aware network can be summarized as: • The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority.
AXIS P33 Series - System Options There are four types of traps available for the network camera. • Cold start • Warm start • Link up • Authentication failed SNMP v3 SNMP v3 - provides encryption and secure passwords. HTTPS must be enabled. To use traps with SNMP v3 an SNMP v3 management application is required. If the Enable SNMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated only when HTTPS is enabled and can only be set once.
AXIS P33 Series - System Options Storage - Disk Management Disk Management is used to setup and manage local storage devices. Local storage can be used to save video streams from triggered, scheduled or continuous recordings. For information on how to use the local storage with Triggered and Scheduled .
AXIS P33 Series - System Options Ports & Devices This page allows configuration of the input and output ports supported by this device. Ports can be given descriptive names, and their Normal state can be configured. For more information, see the online help . LED For a listing of all LED behavior, see page 6 or the online help . Maintenance • Restart - the camera is restarted without changing any settings.
AXIS P33 Series - System Options Support The Support Overview page provides valuable information on troubleshooting and contact information, should you require technical assistance. The System Overview page provides an overview of the camera’s status and settings. Information that can be found here includes the camera’s firmware version, IP address, security, event and image settings and recent log items.
AXIS P33 Series - System Options Advanced Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful tool. Caution! Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems, reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration. Axis recommends that you do not use this function unless you understand the consequences.
AXIS P33 Series - Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of the network cameras. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem. The current firmware version in your camera is displayed on the page Setup > Basic Setup or under About.
AXIS P33 Series - Troubleshooting If the emergency recovery procedure does not get the camera up and running again, please contact Axis support at www.axis.com/techsup/ Axis Support If you contact Axis support, please help us to help you solve your problems by providing the server report, the log file and a detailed description of the problem. Server Report - go to Setup > System Options > Support > Support Overview.
AXIS P33 Series - Troubleshooting Symptoms, Possible Causes, and Remedial Action Problems setting the IP address Try installation again. The IP address must be set within two minutes after power is applied to the camera. Ensure the Ping length is set to 408. See Installation Guide. The camera is located on a different If the IP address intended for the camera and the IP address of your computer are subnet located on different subnets, you will not be able to set the IP address.
AXIS P33 Series - Troubleshooting Color depth set incorrectly on clients. Set to 16-bit or 32-bit color. In the case of blurred text overlays, or other rendering problems, you may need to enable Advanced Video Rendering from the H.264 tab in the AMC control panel applet. Ensure that your graphics card is using the latest device driver. The latest drivers can usually be downloaded from the manufacturer's web site. Color saturation is different in H.264 Modify the settings for your graphics adapter.
Technical Specifications for AXIS P3343 Series Technical Specifications for AXIS P3343 Series Function/group Item Specification Camera Models • AXIS P3343-VE/P3344-VE - SVGA, tamper-resistant, indoor • AXIS P3343-V - SVGA, vandal-resistant indoor • AXIS P3343-VE - SVGA, vandal-resistant, outdoor Image sensor Lens Video Audio • Varifocal, DC-iris, remote focus and zoom • 6mm: 2.5 – 6 mm, F1.
Technical Specifications for AXIS P3343 Series Function/group Item Specification System Integration Application Programming Interface • Open API for software integration, including VAPIX® from Axis Communications*, AXIS Media Control SDK*, event trigger data in video stream, the ONVIF specification available at www.onvif.
Technical Specifications for AXIS P3343 Series Function/group Item Specification General Casing • Aluminum inner camera module with encapsulated electronics • AXIS P3343-VE/P3344-VE: Tamper-resistant casing with polycarbonate base and polycarbonate transparent cover • AXIS P3343-V: 1000 kg (2200 lb.) impact-resistant casing with metal base and rugged polycarbonate transparent cover; Tamper-proof mounting on wall, hard or drop ceiling • AXIS P3343-VE: 1000 kg (2200 lb.
Technical Specifications for AXIS P3344 Series Technical Specifications for AXIS P3344 Series Function/group Item Specification Camera Models • AXIS P3344 - 1MP/HDTV 720p, tamper-resistant, indoor • AXIS P3344-V - 1MP/HDTV 720p, vandal-resistant, indoor • AXIS P3344-VE - 1MP/HDTV 720p, vandal-resistant, outdoor Image sensor Lens Video Audio • Varifocal, DC-iris, remote focus and zoom • 6mm: 2.5 – 6 mm, F1.
Technical Specifications for AXIS P3344 Series Function/group Item Specification System Integration Application Programming Interface • Open API for software integration, including VAPIX® from Axis Communications*, AXIS Media Control SDK*, event trigger data in video stream, the ONVIF specification available at www.onvif.
Technical Specifications for AXIS P3344 Series Function/group Item Specification General Casing • Aluminum inner camera module with encapsulated electronics • AXIS P3344-VE: Tamper-resistant casing with polycarbonate base and polycarbonate transparent cover • AXIS P3344-V: 1000 kg (2200 lb.) impact-resistant casing with metal base and rugged polycarbonate transparent cover; Tamper-proof mounting on wall, hard or drop ceiling • AXIS P3344-VE: 1000 kg (2200 lb.
Technical Specifications for AXIS P3346 Series Technical Specifications for AXIS P3346 Series Function/group Item Specification Camera Models • AXIS P3346 - 3MP/HDTV 1080p, tamper-resistant, indoor • AXIS P3346-V - 3MP/HDTV 1080p, vandal-resistant, indoor • AXIS P3346-VE - 3MP/HDTV 1080p, vandal-resistant, outdoor Image sensor Lens Video • Varifocal with remote zoom and focus, IR corrected, megapixel resolution 3-9 mm, F1.
Technical Specifications for AXIS P3346 Series Function/group Item Network Security Password protection, IP address filtering, HTTPS encryption*, IEEE 802.1X network access control*, digest authentication, user access log Supported protocols IPv4/v6, HTTP, HTTPS, SSL/TLS*, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS.
Technical Specifications for AXIS P3346 Series Function/group Item Specification General Casing • Polycarbonate transparent cover • Aluminum inner camera module with encapsulated electronics • AXIS P3346: Tamper-resistant polycarbonate casing • AXIS P3346-V: IK10 impact-resistant aluminum casing • AXIS P3346-VE: IP66- and NEMA 4X-rated, IK10 impact-resistant aluminum casing with integrated dehumidifying membrane • Color: white NCS S 1002-B Processors, memory • ARTPEC-3, 256 MB RAM, 128 MB Flash • Bat
Technical Specifications for AXIS P3346 Series Function/group Item Specification Video management software (not included) AXIS Camera Station - Video management software for viewing and recording up to 50 cameras See www.axis.
General performance considerations General performance considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this will also affect the frame rate.
Glossary of Terms Glossary of Terms device used in many digital cameras is a large integrated circuit that contains hundreds of thousands of photo-sites (pixels) that convert light energy into electronic signals. Its size is measured diagonally and can be 1/4", 1/3", 1/2" or 2/3". ActiveX - A standard that enables software components to interact with one another in a networked environment, regardless of the language(s) used to create them.
Glossary of Terms names are contained in Domain name servers. entry point to another network. In a corporate network for example, a computer server acting as a gateway often also acts as a proxy server and a firewall server. A gateway is often associated with both a router, which knows where to direct a given packet of data that arrives at the gateway, and a switch, which furnishes the actual path in and out of the gateway for a given packet.
Glossary of Terms IP (Internet Protocol) - The Internet Protocol is a method transmitting data over a network. Data to be sent is divided into individual and completely independent "packets." Each computer (or host) on the Internet has at least one address that uniquely identifies it from all others, and each data packet contains both the sender's address and the receiver's address. Mbit/s (Megabits per second) - A measure of the bit rate, i.e. the rate at which bits are passing a given point.
Glossary of Terms PPTP (Point-to-Point Tunneling Protocol) - A protocol (set of communication rules) that allows corporations to extend their own corporate network through private "tunnels" over the public Internet. In this way a corporation can effectively use a WAN (Wide Area Network) as a large single LAN (Local Area Network). This kind of interconnection is known as a virtual private network (VPN).
Glossary of Terms Varifocal lens - A varifocal lens provides a wide range of focal lengths, as opposed to a lens with a fixed focal length, which only provides one. interface (API). SSL/TSL (Secure Socket Layer/Transport Layer Security) These two protocols (SSL is succeeded by TSL) are cryptographic protocols that provide secure communication on a network. SSL is commonly used over HTTP to form HTTPS, as used e.g. on the Internet for electronic financial transactions.
Index Index O ONVIF 2, 50, 53, 56 A Action Buttons 10, 25 Administrator 15 Alarm 32 AMC 8, 13 ARP/Ping 39 AVHS 53, 56 Axis Media Control 13 P Port Status 33 Post-trigger Buffer 30 Pre-trigger Buffer 30 B Backup 47 Bonjour 8, 43 Buffer Size 30 Buffers 30 R Recovery 48 Q QoS (Quality of Service) 42 QuickTime 13, 25 S Scheduled Event 31 Security 36 Server Time 37 SNMP 42 Support 46 System Options 36 C Camera tampering 31 Capture mode 9, 17 Continuous Recording 35 Control Button 47 T TCP Server 29 TCP
