User`s manual

AXIS P5532-E/P5534-E - Product Description

Overview

Note:

To insert and remove an SD card, or access the camera’s control and restart buttons, the sunshield and top cover must

first be removed; for instructions please refer to the Installation Guide.

Network connector - RJ-45 Ethernet connector. Supports High Power over Ethernet (IEE 802.3at). Use Axis T8123 Midspan

(included). Shielded cable shall be used to comply with EMC.

Network connector

Part number (P/N) & Serial number (S/N).

The serial number may be required

during the installation.

Status indicator

Control button

SDHC memory card slot

Restart button