User manual

AXIS P7210 Video Encoder
System Options
If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair.
To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings
older than and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.
For more information, see the online help
.
Network Share
Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common
Internet File System) and use them f or storage of recordings.
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host s erver in the Host field.
4. Enter the name of the share in the Share field.
5. If required, select The share requires login and enter the user name a nd password.
6. Click Connect.
To clear all recor dings an d data from the A xis product’s folder on the designated share, click Clear under Storage Tools.
To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings,selectRemove recordings
older than and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.
Ports & Devices
I/O Ports
The Axis product provides four configurable input and output ports for connection of external devices. For info rmation on how to
connect external devices, see Connectors, on page 4 .
The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select t he p o rt dire ction ( Input or Output). The
ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.
Note
There are four I/O ports for each group of video input connectors.
COM Port
The video encoder has one RS-485/RS-422 serial port. The port supports the following modes:
• Generic HTTP allows the video encoder to receive data and send commands via HTTP.
• Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See for more information. Drivers can be
downloaded from www.axis.com
• Generic TCP/IPallows the Axis product to receive data and send commands via TC P/IP. Daisy chain server - Allows Daisy
chain clients to communicate with the Axis product. See also RS-485/RS-422 connector, on page 43.
39