User manual
AXIS P7210 Video Encoder
Accessing the product
1. Click Create self-signed certificate.
2. Provide the requested information and click OK.Thecertificate is created and the password can now be set securely. All
traffic to and from the product is encrypted from this point on.
3. Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See Reset to f actory default
settings, on page 42.
The Live View page
If the Axis product has been customized to meet specific re quirements, not all the items described below will appear in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles.SeeStream Profiles, on page 17.
Click Pulse to activate the output for a defined period of time, such a s switching on an external light for 20 seconds.
Click the Active/Inactive b
uttons to manually start and s top a connected device — e.g. switch an external light
on and off.
The Manual Trigger button can trigger a n event directly from the Live View page. The button is configured under
Live View Config > Action Buttons.
9