User manual

AXIS P7210 Video Encoder
Hardware Overview
Hardware Overview
7
8
9
1
2
34
5
6
10 11
12
13
14
15
1
Power connector
2
microSD card slot
3
I/O connector
4
RS-485/RS-422
5
Control button
6
Network connector (PoE)
7
Audio input 1
8
Audio input 2
9
Audio output 1
10
Video inputs
11
LED indica tors
12
Group 1 (4 video input connectors)
13
Group 2
14
Group 3
15
Group 4
Connectors
For technical specifications, see pa
ge 50
.
Network connector - RJ-45 Ethe
rnet connector. Supports Power over Ethernet (PoE).
NOTICE
Due to local regula
tions or the environmental and electrical conditions in which the product is to be use d, a shielded
network cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar
shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded . See
for regulator
y requirements.
Audio in (pink) - 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio out (green) - 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active s peaker
with a built-in amplifier. A stereo connector must be used for audio out.
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.
4