User manual

AXIS P7210 Video Encoder
System Options
3. Click Format and select the desired file system.
Note
During forma tting any pre vious data s tore d on the disk wi ll be lost.
Mounting is done automatically when the card is inserted or when the product is started. A m anual m ount is only required if the
card has been unmounted and not ejected and re-inserted.
To unmount the SD card:
1. Go to System Options > Storage an d click SD Card.
2. Click Unmount.
3. The car d can now be removed.
The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.
If the c ard’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only
available for S D card s with e xt4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.
To a void filli ng the card, it is re com m e nde d to remove recordings continuously. Under Recording Settings, select Rem ove recordings
older than and select the number of days or weeks.
To stop writing to the card and protect recordings from being rem ove d, s elec t Lock under Recording Settings.
Network Share
Network share allow s you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common
Internet File System) a nd use them for storage o f recordings.
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.
4. Enter the name of the share in the Share field.
5. If required, select The share requires login and e nter the user name and passw o rd .
6. Click Connect.
To clear all recor dings and data f rom the A xis product’s folder on the designate d sha re, click Clear under Storage Tools.
To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings,selectRemove recordings
older than and select the number of days or weeks.
To stop w riting to the share and protect recordings from being removed, select Lock under Recording Settings.
Ports & Devices
I/O Ports
The Axis product provides four configurable input and output ports for connection of e xte rna l devices. For information on how to
connect external devices, see
Connectors, on page 4 .
The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The
ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.
41