User manual
AXIS P7210 Video Encoder
Accessing the Product
Click Snapshot to save a snapshot of the video image. Right-click the video image to sa ve it in JPEG format on your
computer. This button is primarily intended for use when the A XI S Media Control view er toolbar is not available.
Enable this button from Live View Config > Action Buttons.
The Audio clip drop-down list allows you to play an audio c lip from the L ive View page. Select the audio
clip and click the Play button.
Enable or disable the Gatekeeper by se lecting On or O f f fr om the drop-down list. See for mor e inform a tion about
Gatekeeper.
AXIS Media Control viewer toolbar
The AXIS Med ia Control viewer toolb ar is available in Internet Explore r only. See
AXIS Media Control (AMC), on page 10
for more
information. The toolbar displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The locationwheretheimageissavedcanbespecified
in the AMC Control Panel.
Click the View Full S creen button and the video image will fill the entire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record the current video stream . The loca tion w h er e the recording is saved can be specified
in the AMC Control Panel.
AMC Audio Controls
AMC audio buttons control the speakers and micro ph one connected to the client computer. The button
s are only visible w hen
audio is enabled.
Speaker button — Click to turn the speakers on or off.
Microphone button – Click to mute or unmute the microphone. In
Si
mplex - speaker only mode
,theMicrophone and Talk
buttons must both be a ctive to send audio to the Axis product. Click either bu tton to stop audio transmission.
Use the slider to control the volume of the speakers and the microphone.
Half-duplex mode
The Talk /Listen button is used to switch between sending and receiving audio. The button can be configured
from the Audio tab in the AMC Control pa
nel:
• Push-To-Talk mode: Click an d hold the button to talk/send. Release the button to listen.
• Toggle mode: Click once to s witch between talking and listening.
Simplex – speaker only mode
To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio
transmission.
8