User manual

AXIS P7210 Video Encoder

Accessing the Product

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The a dministrator can enable/disable controls for speciﬁed users under

System Options > Security > Users.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or

release control of the PTZ controls . The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the

mouse pointer.

Click the Center mode button and click in the image to center the ca mera view on that position. The center mode

button could also be used to zoom in on a speciﬁc area. Click in the image and drag to draw a re cta n gle s urroundi n g

theareatobemagniﬁed. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.

User-deﬁned buttons can also appear in the Control panel. See

Controls, on page 24

Select the video channel or a PTZ preset position to steer the camera view to the saved position. See

Preset Positions, on page 23

Click the Start Auto Track button to start a utotracking dire ctly from the Live View page. See .

Pan and Tilt bars – Use the arrow s to pan and tilt the camera view, or click on a position on the bar to steer the

camera view to that position.

Zoom bar – Use the a rro ws to zoom in and o ut, or click on a position on the bar to zoom to that position.

Focus bar – Use the arro ws to focus the camera, or click on a position o n the bar to set the focus position. Using the

focus bar will d isable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clicking

the Ctrl panel button (see above).

Iris bar – Click on a position on the iris bar to change the de gre e to which the iris is opened. This will disable the

product’s auto iris. To re-enable, us e the PTZ control pa ne l which is ope ned b y clicking the Ctrl panel button (see above).

The PTZ controls can be disabled under PTZ > Advanced > Controls,see

Controls, on page 24