User`s manual

AXIS P7214 Video Encoder

System Options

Port Status

The lis t on the System Options > Ports & Devices > Port Status page shows the status o f the product’s input and output ports.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

• the boot pro tocol (DHCP or static)

• the static IP address

• the default router

• the subnet m ask

•thesystemtime

• the IEEE 802.1X settings

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution

.The

Axis product can also be reset to factory default using the control button, see Reset to factory default settings, on page 43.

To identify the p roduct or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.

This can be us eful for identifying the product among other products installe d in the same locati on.

For information about ﬁrmware upgrade, see Upgrading the ﬁrmware, on page 44.

pport

Support Overview

The System Options > Support > Support Overview page provides information on troubleshooting and contact information,

should you require technical assistance.