User`s guide

Basic Installation AXIS 70U/7000 User’s Guide

6. Press Select to confirm the changes.

7. Press Menu to display the default router address setting:

8. Press Select to edit the default router address:

9. To change the value, repeat steps 4 - 6 above.

10. Press Menu to display the subnet mask setting:

11. Press Select to edit the subnet mask:

12. To change the value, repeat steps 4 - 6 above.

13. Press Menu to display the node address. This address is not editable.

The node address should be equal the AXIS 70U/7000 serial number found

on the underside label of the unit.

14. Press Menu once more to display the final instructions:

15. Press Select to exit the network settings. The AXIS 70U/7000 then

completes the startup sequence.

16. Write the name or IP address of the AXIS 70U/7000 on the supplied

instructions label and attach it to the top cover.

The unit is ready for use when the Status indicator stops flashing and remains

lit.

Note:

Default router:

000.000.000.000

Edit router:

000.000.000.000

Net mask:

000.000.000.000

Edit net mask:

000.000.000.000

Press if you

are finished

If you make a mistake when editing the parameters, press the Cancel button to cancel the previous

operation.