User`s guide

AXIS 70U/7000 User’s Guide Configuring the AXIS 70U/7000
15
Configuring the AXIS 70U/7000
This section is targeted specifically to users responsible for the administration
of the AXIS 70U/7000. Administrator(s) are granted with high-level privileges
that are denied to the ordinary user(s).
The following settings must be specified by the administrator before the
AXIS 70U/7000 can be used for distributing scanned documents on your
network:
Network settings: Define the parameters for TCP/IP and SMTP protocols.
Destinations: Specify the e-mail address to which you wish to send your
document.
Notes:
Accessing the Administration Tools
The Web based administration tools provide a convenient method for
managing destinations, profiles, defining the network protocol settings,
establishing user privileges, authentication etc. The AXIS 70U/7000
Administration pages are password protected and available to the
Administrator(s) only.
Follow the instructions below to access the Administration tools using a
standard Web browser:
1. Start your Web browser.
2. Enter the name or IP address of your AXIS 70U/7000 in the loca-
tion/address field. Example: http://192.168.0.90
The AXIS 70U/7000 home page is displayed.
• If you have an active DHCP or BOOTP server on your network, most network settings will be set
automatically. However, it is strongly recommended that you verify the settings from the Web
browser interface.
• When installing the AXIS 70U/7000 for the first time, it is recommended that the Administrator
retains default system settings, profiles and paper sizes. The settings can be optionally custom-
ized at a later date, once you are familiar with the unit operation and functionality.
• Refer to applicable parts of the AXIS 70U/7000 User’s Manual for information on the settings
for profiles.
• It is possible to enable user authentication to restrict use of the AXIS 70U/7000 to validated
users only. For more information, please refer to the AXIS 70U/7000 User’s Manual at the Axis
Web site http://www.axis.com