User manual

AXIS Q6035 PTZ Dome Network Camera
Events
HTTP Server
•Receivesnotification messages
• Receives uploaded images
• Descriptive name
• URL (IP address or host name)
• User n ame and password
• Proxy settings
TCP Server
•Receivesnotification messages • Descriptive name
• Network address (IP address or host name)
• Port number
For det ails on each setti ngs, see the online help .
Event Types
An Event Type d escribes how and when the Axis product performs certain actions.
Example
If somebody passes in front of the camera and an event has been configured to detect and respond to motion, the Axis product can
recordandsaveimagestoanFTPserverandsendanotification email. Images can be sent as email attachments.
Set up a triggered event
The following example describes how to configure the Axis product to upload im ages when motion is detected.
1. Go to Events > Motion Detection and set up a motion detection window. See
Set up motion detection, on page 33 .
2. Go to Events > Event Types and click Add triggered.
3. Enter a descriptive name for the event, for example Motion detected.
4. Set the Priority — high, normal or low.
5. Set the Respond to Trigger parameters to define when the event is active, for example, after office hours.
6. Select Motion detection from the Triggered By list. Sele ct the de si red motion d etection window and indica te if the event
should be triggered when motion starts or stops (or both).
7. Set the When Triggered parameters, that is, define what the product should do when motion is detected. To upload images,
select Save stream and enter the required information. See
Save stream .
8. Click OK to save the event.
31