User manual

AXIS Q6035 PTZ Dome Network Camera

System Options

Ports & Devices

I/O Ports

The Axis product provides four conﬁgurable input and output ports for connection of external devices. A multi-connector cable

(available from Axis) is required when connecting external d evices, s ee

Multi-Connector Cable (sold separately), on page 48

The I/O ports are conﬁgured under System Options > Ports & Devices > I/O Ports. Selec t the port direction (Input or Output). The

ports can be given descriptive names and their Normal states can be conﬁgured as Open circuit or Grounded circuit.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

• the boot pro tocol (DHCP or static)

• the static IP address

• the default router

• the subnet mask

•thesystemtime

• the IEEE 802.1X settings

Click Default to reset all settings, includ ing the IP address, to the

factory default values. This button should be used with caution. The

Axis product can also be reset to factory default using the control button, see

Reset to factory default settings, on page 47

To test the product’s PTZ mechanics, click Test under PTZ Status.

To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.

This can be useful for identifying the p roduct among other products installed in the same location.

For information about ﬁrmw are upgrade, see

Upgrading the ﬁrmware, o n page 50

Support

Support Overview

The System Options > Support > Support Overview page provides information on troubleshooting and contact information,

should you require technical assistance.

See a lso

Troubleshooting, on page 50

System Overview

To get an overview of the Axis prod uct’s status and settings, go to System Options > Support > System Overview. Information that

can be found here includes ﬁrmw ar e version, IP address, network and security settings, event settings, image settings and recent log

items. Many of the captions are links to the proper Setup page.

Logs & Reports

The System Options > Support > Logs & Reports page generates logs a nd reports useful for system analysis and troubleshooting. If

contacting Axis Suppo rt, please provide a valid Server Report with y our query.