INSTALLATION GUIDE AXIS Camera Station S1032 Recorder AXIS Camera Station S1048 Recorder
About this Document This document includes instructions for installing AXIS Camera Station S1032 Recorder and AXIS Camera Station S1048 Recorder on your network. Previous experience of networking will be beneficial when installing the product. Legal Considerations Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
AXIS S1032/AXIS S1048 Installation Guide Page 3 AXIS S1032/AXIS S1048 Installation Guide This installation guide provides instructions for installing AXIS Camera Station S1032 Recorder and AXIS Camera Station S1048 Recorder. For more information about how to use the product, go to www.axis.com Installation Steps 1. Hardware overview. See page 4. 2. Connect the cables: • AXIS S1032. See page 6. • AXIS S1048. See page 8. 3. Set up software. See page 10. 4. Network configuration. See page 10. 5.
Page 4 AXIS S1032/AXIS S1048 Installation Guide Hardware Overview - AXIS S1032 Back Panel 1 PCIe expansion card slot 1 7 Ethernet connectors (2) 2 vFlash media card slot (Optional) 8 USB connectors (2) 3 Do not use -iDRAC port 9 System identification connector 4 Serial connector 10 System identification button 5 PCIe expansion card slot 2 11 Power supply (PSU1) 6 Video connector 12 Power supply (PSU2) Hardware Overview - AXIS S1048 Back Panel 1 PCIe expansion card slot 1 7 Ethernet connecto
AXIS S1032/AXIS S1048 Installation Guide Page 5 Unpack and Install the Recorder Unpack your system and identify each item, see Package Contents on page 3. Assemble the rails and install the Axis recorder in the rack following the safety instructions and the rack installation instructions provided with your system.
Page 6 AXIS S1032/AXIS S1048 Installation Guide Connect the Cables - AXIS S1032 Warning: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com NOTE: Some devices may not be included if you did not order them. 1. Connect the keyboard, mouse and monitor. The connectors on the back of your system have icons indicating which cable to plug into each connector.
AXIS S1032/AXIS S1048 Installation Guide Page 7 3. Secure the power cables by bending the system power cables, as shown in the illustration, and attach to the cable straps. Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU). 4. Press the power button to turn on the recorder. The power indicator should light up. 5. Install the bezel.
Page 8 AXIS S1032/AXIS S1048 Installation Guide Connect the Cables - AXIS S1048 Warning: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com NOTE: Some devices may not be included if you did not order them. 1. Connect the keyboard, mouse and monitor. The connectors on the back of your system have icons indicating which cable to plug into each connector.
AXIS S1032/AXIS S1048 Installation Guide Page 9 3. Secure the power cables by bending the system power cables, as shown in the illustration, and attach to the cable straps. Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU). 4. Press the power button to turn on the recorder. The power indicator should light. 5. Install the bezel.
Page 10 AXIS S1032/AXIS S1048 Installation Guide iDRAC7 Express This product includes the Integrated Dell Remote Access Controller (iDRAC)7 Express. iDRAC7 Express can be used to manage, update and deploy servers in large installations. iDRAC allows you to remotely monitor the health of this product in order to discover problems, such as failing hard drives as soon as possible and to avoid system downtime. For more information, go to www.dell.
AXIS S1032/AXIS S1048 Installation Guide Page 11 First install the AXIS S1032/S1048 recorder. Then install AXIS S9001 and start AXIS Camera Station Client. From AXIS S9001, log in to the AXIS Camera Station Server installed in the AXIS S1032/S1048 recorder. It is not recommended to use AXIS S1032/S1048 for accessing video. The preinstalled AXIS Camera Station Client is intended for initial configuration and not for active use.
Page 12 AXIS S1032/AXIS S1048 Installation Guide Physical: AXIS S1032 AXIS S1048 Height 42.8 mm (1.68 inch) 86.8 mm (3.42 inch) Width With rack latches 482.4 mm (18.99 inch) With rack latches 482.4 mm (18.99 inch) Without rack latches 434.0 mm (17.09 inch) Without rack latches 434.0 mm (17.09 inch) Depth (excludes bezel) 607.0 mm (23.9 inch) 611.1 mm (24.06 inch) Weight 13.6 kg (30.0 lb) 19.7 kg (43.
AXIS S1032/AXIS S1048 Installation Guide Page 13 Operating 20% to 80% (noncondensing) 20% to 80% (noncondensing) at a maximum wet bulb at a maximum wet bulb temperature of 29 °C (84.2 °F) temperature of 29 °C (84.2 °F) Storage 5% to 95% at a maximum wet 5% to 95% at a maximum wet bulb temperature of 38 °C bulb temperature of 38 °C (100.4 °F) (100.
Page 14 AXIS S1032/AXIS S1048 Installation Guide Further information For more information about the product visit www.axis.com Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides. Warranty For information about Axis’ product warranty and thereto related information, see www.axis.
Installation Guide AXIS Camera Station S1032 Recorder, AXIS Camera Station S1048 Recorder © 2014 Axis Communications AB © 2013 Dell Inc. Ver.1.0 Printed: August 2014 Part No.
