INSTALLATION GUIDE ENGLISH AXIS T91A63 Ceiling Mount
About this Document This document includes instructions for installing the AXIS T91A63 Mounting Accessory. Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. Liability Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions.
AXIS T91A63 Ceiling Bracket Installation Guide Page 3 AXIS T91A63 Ceiling Bracket This installation guide provides instructions for installing the ceiling bracket for Axis network cameras. For all other aspects of using the Axis network camera, please see the Installation Guide and User’s Manual, available from www.axis.com/techsup Installation steps • Check the package contents against the list below Hardware overview. See page 4 Installation instructions.
Page 4 AXIS T91A63 Ceiling Bracket Installation Guide Hardware overview Bracket holder Ceiling bracket Torx screws (4) Holes for mounting screws (6) Pendant adapter Torx T30 screws (3) Slots for unit holders (3) Stop screw Safety wire
AXIS T91A63 Ceiling Bracket Installation Guide Page 5 Install the AXIS T91A63 Ceiling Mount 1. Refer to Hardware overview, on page 4 for information on the supplied parts. 2. Route the network cable through ceiling. 3. Attach the bracket holder at the desired position in the ceiling using screws that are appropriate for the ceiling material and the total weight of the pendant kit, camera and bracket. Maximum weight allowed 15kg (33lbs).
Page 6 AXIS T91A63 Ceiling Bracket Installation Guide 5. Use the Torx screws to secure the ceiling bracket to the bracket holder Torx screws(4) 6. Refer to the camera installation guide for specific instructions on installing your camera. Note: Some installations may require the supplied pendant adapter to be replaced which is done by loosening the stop screw and unscrewing the adapter. In this case, refer to the Installation Guide included with the pendant kit.
AXIS T91A63 Ceiling Bracket Installation Guide Page 7 Technical Data AXIS T91A63 Corner Mount 195 x 750 x 138 mm 7.7 x 29.5 x 5.4 inches Weight 1900g / 4.2lbs Max. weight supported 15kg / 33lbs Material Aluminum Color code NCS S 1002-B Mounting holes (diameter) 9mm / 3.5 inch ENGLISH Size (width/height/ depth) Bracket holder 96mm (3.8”) 124mm (4.
Installation Guide AXIS T91A63 © Axis Communications AB, 2009 Ver.1.00 Printed: October 2009 Part No.