Operating instructions

Operating Instructions
12
Fig 25
Fig 26
Open the motor pulley access door by pulling back
the sprung door knob.
Motor pulley
Fig 27
Fig 28-29
Release the motor handle lock, lift the motor up
and retighten to lock the motor in position
Changing the Lathe Speed
DISCONNECT THE LATHE FROM
THE MAINS SUPPLY BEFORE
CONTINUING!
1. Open the motor pulley access door by pulling
the door knob back, (see figs 25-26). Lower the
headstock cover to access the pulleys, (see fig 27).
2. Release the motor handle lock and lift the motor
up, tighten the handle to lock the motor in position,
this releases the tension on the pulleys (see figs
28-29).
PLEASE NOTE THE FOLLOWING
PICTURES SHOW THE AH-1218
LATHE.