Specifications

ManualsBrandsAxminster ManualsGrinderAW8SRG2

507

Axminster Premium Diamond StonesDiamond Stones

Order online axminster.co.uk/sharpening

These mini diamond hones, with their 19 x 50mm continuous

diamond sharpening areas, are just the job when you need to

take the stone to the tool rather than vice versa. The three grades,

medium, ﬁ ne and extra ﬁ ne with colour coded handles, cater for

all situations. Blue = 180g, Yellow = 260g, Red = 360g.

Set of 3 £8.94 £7.45 200219

Inc.vat Ex.vat Code

Axminster

Handled Diamond Hones

Two sets are available each

comprising three diamond

stones. Available sizes are 25 x

75mm, or 50 x 150mm. Supplied in

one of each grit 180, 260 and 360,

colour coded for ease of identiﬁ cation. Use them for sharpening

or touching up all manner of small tools, chisels, pocket knives

or router cutters. Use a little water as lubricant and dry after use.

Blue = 180g, Yellow = 260g, Red = 360g.

25mm x 75mm £3.95 £3.29 400092

50mm x 150mm £7.94 £6.62 400093

Inc.vat Ex.vat Code

Axminster

Diamond Mini

Stone Sets

stones. Available sizes are 25 x

75mm, or 50 x 150mm. Supplied in

one of each grit 180, 260 and 360,

colour coded for ease of identiﬁ cation. Use them for sharpening

Twice the sharpening potential of a double sided stone. Each side

is coated in a different grade of diamond grit. Sharpening is always

easier and more efﬁ cient when done progressively. With this four

sided stone you only need turn the face through 90° to begin the

next stage to achieving a sharp edge. This is perfect for sharpening

tools and many household implements. Easy and fast to use with

200, 300, 400 and 600 grit colour coded faces. No oil required just

use water to lubricate. Includes non-slip base and storage case.

Each diamond surface measures 50mm (2”) x 150mm (6”).

Diamond Stone £17.94 £14.95 600683

Inc.vat Ex.vat Code

Axminster

Four Sided Diamond Stone

These 200 x 65mm double sided premium quality diamond

stones give two options, just by ﬂ ipping them over. We tested

these extensively, medium 400g (36 micron) on one side and

ﬁ ne 1,000g (15 micron) on the other. Nickel plating permanently

ﬁ xes the diamond particles onto the 8mm thick steel base. A

chequered pattern carries away metal particles so maintaining

the stone’s cutting efﬁ ciency. The resulting surface is more than

capable of sharpening modern hard steels, ceramic knives as well

as traditional tool steels. A protective non-slip rubber surround

keeps the stone in place when in use. You can use it dry but it

works far better with a splash of water.

Axminster

Double Sided

Diamond

Bench Stone

Double Sided Diamond Bench Stone £22.94 £19.12 951777

Inc.vat Ex.vat Code

Axminster

These premium quality diamond bench stones have excellent

sharpening performance and will sharpen most sizes of plane

irons, chisels and knives. They feature solid plastic bases with

non-slip feet and a small area of continuous diamond for detail

sharpening of pointed tools. The size is 150 x 62mm (6” x 2.7/16”)

in two grades: medium (400grit) or ﬁ ne (1,000grit).

150 x 62mm Medium £15.95 £13.29 200224

150 x 62mm Fine £15.95 £13.29 200225

Inc.vat Ex.vat Code

Axminster

Premium Diamond Bench Stones

This very useful general purpose diamond sharpening stone has

ﬁ ne abrasive on one side and coarse on the other. Both sides have

small areas of continuous diamond for sharpening small items.

The protective cover can be removed and ﬁ tted to the other end

to form a handle. The size of the abrasive surface is 25 x 100mm.

Coarse/Fine £8.94 £7.45 200220

Inc.vat Ex.vat Code

Axminster Premium Double

Sided Diamond Stone

200217

200218

Two handy sets of coarse, medium and ﬁ ne diamond stones held

together on a chain and with a leather fob. Both are small enough

to be kept in the pocket, ready for use at any time. The smaller set

measures 19 x 64mm and the larger 50 x 85mm.

Axminster

Keyring Diamond Stones

19 x 64mm £9.44 £7.87 200217

50 x 85mm £13.44 £11.20 200218

Inc.vat Ex.vat Code

The easiest way to keep your planer knives in good condition without

removing them from the machine. The diamond hone consists of two

diamond slips, 325 and 600 mesh, held at an angle in a wooden handle

for topping and backing the blade. Applying the diamond to the edge of

the blade and moving it along the length with a uniform pressure should

restore the blades to their former glory. Please note, these are for honing

the blades, they will not restore chipped or very dull blades. See online

video. Suitable for HSS or TCT edged blades.

Axminster Diamond

Planer Blade Hone

Planer Blade Hone £26.45 £22.04 510258

Inc.vat Ex.vat Code

Fast Track is designed to produce ﬂ at, square and consistent bevels

quickly and simply. The system is comprised of four parts: a base,

handle/stone holder, coarse diamond stone (180 grit) and a ﬁ ne

diamond stone (400 grit). The handle/stone holder slides in a dovetail

groove and is moved back and forth across the face of the bevel,

giving guaranteed straight, ﬂ at ground, razor ﬁ ne edges every time.

Two other grades of diamond stone are available as accessories: an

extra coarse diamond stone (90-120 grit) and an extra ﬁ ne ﬁ nishing

diamond stone (600 grit). The Fast Track takes blades from 3mm (1/8”)

to 64mm (2.1/2”) wide and sharpens at 25° or 30° bevels.

Fast Track System £67.94 £56.62 438401

Stone for Fast Track XFine 600G £13.25 £11.04 439033

Stone for Fastrack Coarse 90/120g £13.25 £11.04 541005

Inc.vat Ex.vat Code

Trend Fast Track

Sharpening System

18_Sharpening 509_527.indd 507 29/11/2013 13:26

Summary of content (19 pages)

PAGE 1
Diamond Stones Axminster Premium Diamond Stones 200217 Axminster Double Sided Diamond Bench Stone Axminster Handled Diamond Hones These mini diamond hones, with their 19 x 50mm continuous diamond sharpening areas, are just the job when you need to take the stone to the tool rather than vice versa. The three grades, medium, fine and extra fine with colour coded handles, cater for all situations. Blue = 180g, Yellow = 260g, Red = 360g. Inc.vat Ex.vat Code Set of 3 £8.94 £7.
PAGE 2
DMT Diamond Stones DMT DuoSharp 250mm Double Sided DMT Mini Whetstones An excellent introduction to the benefits of diamond sharpening.
PAGE 3
Lapping & Stropping 502500 502390 Connell Double Sided Leather Strop Veritas Glass Lapping Plate The Veritas lapping plate is made from safety glass and is 215 x 355 x 6.3mm (8-1/2” x 14” x 1/4”) and is guaranteed to be flat. Inc.vat £13.04 Glass Lapping Plate Ex.vat £10.87 Code 476783 Veritas Steel Honing Plate Small Granite Surface Plate Made entirely of granite, it will always remain flat and neither changes in temperature nor humidity will affect its accuracy.
PAGE 4
Section Waterstones Japanese Combination Waterstones Axminster Non-Skid Holder For anyone who has not used a Japanese waterstone before then a combination provides a good introduction. Size 200 x 50 x 25mm. Inc.vat Ex.vat Code 250/1,000 Grit £24.44 £20.37 510468 1,000/6,000 Grit £33.95 £28.29 510469 Japanese Coarse Waterstones The very coarse 240 grit stone cuts with amazing speed, but as is the nature of these stones, wears somewhat quicker than an oilstone.
PAGE 5
Oil Stones Honing Guides Axminster Deluxe Honing Guide Blade & stone not included Stanley Combination Oilstone Sharpening Kit Veritas Mk.II Honing System A good starter kit for general purpose plane blades and chisels. Contains double-sided (Fine/Coarse) silicon carbide stone, honing guide and lubricating oil in a refillable plastic container. Complete with pictorial instructions. Size 200 x 50mm. Inc.vat £15.74 Oilstone Kit Combination Stone Includes Honing Oil Ex.vat £13.
PAGE 6
Knife Sharpeners Drill Bit Sharpening Chestnut Tools Universal Blade Sharpener AccuSharp Knife & Tool Sharpener A very effective, easy to use and safe knife sharpener. The Accusharp will sharpen kitchen knives, pocket knives, utility knives and axes. The solid tungsten carbide blades are reversible, giving this sharpener literally years of useful life. Inc.vat £12.44 Sharpener Ex.vat £10.37 Code 400001 The sub-micron tungsten carbide blade sharpens to a smooth finish requiring very little force.
PAGE 7
Water Slip Stones A set of two 4000 grit waterstones. Firstly, a 108 x 63.5 x 16mm block with 5 shallow rounded grooves on one side for sharpening the bevels of a wide range of sweeps of carving tools, the reverse side and edges can obviously be used for flat tools. Secondly, a small slip stone 63.5 x 38mm tapered with two round edges 3 x 6mm radius for inside small tools etc. Waterstone Set Norton India Oil Slip Stones Traditional Shaped Water Slip Stones Japanese Carver’s Stone Inc.vat £21.95 Ex.
PAGE 8
Tormek Water Cooled Sharpening Systems The Ultimate Sharpening System Tormek SE-76 Square Edge Jig Acme Thread Universal Support with minimum play so you can sharpen with accuracy and perfect repeatability. For plane irons and wood chisels. This second generation Tormek design makes it easy to mount the tool straight in the jig. Safety stops prevent the tool from slipping off the stone. Max tool width 76mm (3”), max tool thickness 9mm (3/8”).
PAGE 9
Tormek Water Cooled Sharpening Systems With the wide range of Tormek patented jigs you can sharpen practically all types of edge tools.
PAGE 10
Tormek Jigs Tormek SVM-45 Knife Jig With this original Tormek knife jig you can sharpen most types of knives. The jaws of the clamp adjust to suit different thicknesses of blade. Restore the blade to its original edge angle or choose the angle you prefer. The jig rests freely onto the Universal Support so you can follow the curve of the blade and get an even bevel. The edge angle can be fine tuned by turning the handle. Use SVM-45 for ordinary and smaller knives down to a minimum of 70mm blade length.
PAGE 11
Tormek Accessories and Upgrades Tormek BGM-100 Tool Rest, Jigs and Setting Gauge – Package Deal! There is a distinction between shaping and sharpening. Once the tool is shaped, you just want to touch up the edge, never removing more steel than necessary. The time consuming initial shaping is now possible using a bench grinder in conjunction with the Tormek BGM-100 Mounting Set.
PAGE 12
Section Jet Wetstone Sharpener Accessories Jet JSSG-10 Wetstone Sharpener Jet Wetstone Bevel Angle Measuring Device This small tool is used either to measure an existing bevel angle or check progress when re-grinding a new angle. If a certain angle is found to work well in a particular situation, the angle can be accurately measured and using the Angle Setting Jig, other tools ground exactly the same. Measuring Device Inc.vat £11.45 Ex.vat £9.
PAGE 13
Jet Wetstone Sharpener Section Jet Wetstone Carving Tool Jig Jet Wetstone Diamond Truing Tool Easy to use and easy to set up. Sooner or later the grindstone will need to be dressed, either due to glazing or to remove an accidental groove. The back bar of the Truing Tool prevents the diamond tipped dresser from removing more material than necessary. So dressing and truing becomes a quick and safe operation with minimal change to the wheel other than the restoration of its free grinding surface.
PAGE 14
Section Wet & Dry Grinders Axminster AWWSG Wetstone Grinder AWWSG Grinder Inc.vat £49.94 Ex.vat £41.62 Code 400126 A dual-purpose machine, so perhaps it can be considered double the value. The right hand side is fitted with a 150mm by 20mm white dry grinding wheel running at 2,950rpm and on the left hand side is a gearbox which reduces the speed of the 200mm by 40mm wide whetstone to 120rpm.
PAGE 15
Creusen Powerline Grinders Section Creusen Wall Support Stand Support wall console for wall mounting Creusen 7000 and 8000 double-ended grinders. Creusen HP7200T Powerline Grinder Creusen HP7150T Powerline Grinder The Creusen HP7150T 150mm grinders is available in either 230V or 110V. Supplied with 350W, 2,850rpm motor and two 20mm wide grey aluminium oxide grindstones, 36 grit and 80 grit. (Bore size 15mm). Inc.vat £176.94 £199.94 HP7150T Grinder 230V HP7150T Grinder 110V Ex.vat £147.45 £166.
PAGE 16
Section Professional Grinders Creusen Accessories Creusen DS8150T Professional Grinder The DS8150T, in 230V or 415V, with 150mm diameter wheels and a 500W(230V)-600W(415V) motor, has 36 grit and 80 grit x 20mm wide standard grindstones. Fitted with fully adjustable, double locking tool rests (adjustable in depth, height and distance away from the wheel) and no-volt-release safety switches. (bore size 15mm). Not suitable for use with wire brushes.
PAGE 17
Polishing Machines Grindstones & Wire Brushes Red Grinding Wheels A pair of semi-friable grindstones suited to the grinding of fine edged hand tools where the risk of overheating needs to be avoided. Available in 150mm diameter 31.75mm(1.1/4”) bore, 80 grit and two widths, 20mm or 25mm. Inc.vat Ex.vat Code 150mm dia 20mm width 80G £17.94 £14.95 075001 150mm dia 25mm width 80G £19.94 £16.
PAGE 18
Polishing Kits Polishing Kit for Alloys, Brass & Copper Used with a power drill or flexible shaft, this kit provides all you need to produce a mirror finish on aluminium, brass, copper and similar soft metals. It only takes two easy steps, initially with the 100mm firm mop and brown compound, followed by the 100mm soft mop and blue compound. The kit also includes a straight arbor with which to mount the mops in a drill chuck. Inc.vat Ex.vat Code Kit for Alloys, Brass and Copper £16.44 £13.
PAGE 19
Polishing Mops & Adaptors Section Polishing Mops Sisal These stitched sisal mops have leather centre washers for use on a tapered spindle mounted on a bench grinder or a taper pigtail in a drill chuck. The sisal mop consists of sections, each with a thickness of approximately 13mm. Sisal fibres sandwiched between calico cloth make up each section, which are then spirally stitched. A sisal mop is more aggressive than a standard stitched mop.