User manual

WHITE
AXMINSTER
W
09
Setting Up the Grinder...

FREEPHONE 0800 371822
Carry out a final check e.g. start the machine, check it runs smoothly. On each side, check
that the spark guard is adjusted down to the stone, check the gap between the tool rest
and the stone is correct, check the stone is not badly deformed (rounded edges, grooved
face, etc; unless you have specifically shaped the stone to these profiles)check the eye
shield is correctly positioned. Have a cooling pot to hand if you need it, and remember
safety goggles are a good investment. (you are only issued with one pair of eyes).
Specification...
Axminster No. 700009 (AWBGDL)
Motor 230V 50Hz 200W
Wheel Size (Gray) 150 dia, 20mm wide 16mm bore (uses bushes to reduce to 12.7mm)
(White) 150 dia, 40mm wide 16mm bore (uses bushes to reduce to 12.7mm)
Speed 2800rpm
Footprint (Fully Assembled) LxWxH 320mm x 200mm x 280mm
Deep Hold Down Holes (8mm) Fixing Centres 146 x 102mm
Weight 8.6 kg